|  AUTOLAB ELECTROCHEMICAL STATION  |  USB SAMPLE PROCESSOR  |  TOTAL ORGANIC CARBON ANALYZER  |

 

 

AUTOLAB ELECTROCHEMICAL STATIONAutolab Electrochemical Station

The AUTOLAB electrochemical station is used for the evaluation and analysis of material corrosion (SS, Metal coating, etc.). It can also be used for quantitative analysis of metal ions and some organic ions (CN-, S2-, SO32-, NO2-, NO3-, EDTA, Vitamins, Acetons, etc.).

 

Main Application/Advantages


The main applications of this machine are the detection of oxidation capacity of solutions, corrosion potentials, and the analysis of corrosion current and rate using the Tafel method, full cyclic voltammetry, polarography and the drop mercury method. For example, the AUTOLAB electrochemical station can be used to analyze CV spectrum with different organic additives.

Specifications

Some Cations:            Hg2+   Cd2+   Ni2+   Pb2+   Co2+   Cr(III)/(VI)

Detection Limit (ppt) :    100     50      nbsp;  50        50        50       25

 

PAGE TOP


USB SAMPLE PROCESSOR USB SAMPLE PROCESSOR

Main Application/Advantages

 

  1. With one work station and two pump connections for automatic processing of small to medium numbers of routine samples.
  2. The device can be controlled in stand alone operation using the Touch Control unit or by means of a PC.
  3. The system processes the provided samples (automatic sample preparation, liquid handling or sample processing) regardless of the time of day while ensuring full traceability of each single step.

 

Specifications

Built-in pumps with valves Capacity: >450mL/min
Nominal working range +5…+45℃(at max. 80% relative humidity)
3MSB connectors MSB…MSB3(Metrohm Serial Bus)
Mini-DIN sockets (8pins) for the connection of Dosimat or Dosino drives, Stirrers or Remote boxes

 

PAGE TOP

 

TOTAL ORGANIC CARBON ANALYZERTOTAL ORGANIC CARBON ANALYZER

Total organic carbon (TOC) Analyzer is a highly sensitive, non-specific measurement of all organics present in a sample. It can be used to regulate the organic chemical discharge to the environment in a manufacturing plant. In addition, low TOC can confirm the absence of potentially harmful organic chemicals in water used to manufacture pharmaceutical products. TOC is also of interest in the field of potable water purification due to disinfection of byproducts.

Main Application/Advantages


TOC is the first chemical analysis to be carried out on potential petroleum source rock in oil exploration. It is very important in detecting contaminants in drinking water, cooling water, water used in semiconductor manufacturing, and water for pharmaceutical use.

 

Specifications

Analyze TC, IC, TOC
Measuring range TOC:0~30000mg/L
Repeatability CV within 1.5%
Carrier gas High purity air, Approx.300~600kPa

 

PAGE TOP